YOUR CURRENT POSITION: Home > Application
Pellet mill is the main equipment in the production process of each feed factory
Release time: 2022-09-09
The pellet mill is the main equipment in the production process of each feed factory, and it can also be said to be the heart of the feed mill. The correct use of the pellet mill directly affects the economic benefits of the feed mill. Therefore, how to properly use and maintain the pellet mill Machinery is a major issue for feed factories to improve production efficiency.
Zhengchang granulator is characterized by the use of gear transmission structure, which has the advantages of long service life, high production capacity and low power consumption, and has become the preferred product of various feed factories. But good equipment also needs correct use and careful maintenance. The Zhengchang 400 granulator used by Inner Mongolia Saifeiya Group has been working continuously for 3 years, producing 24 hours a day, and has never failed. According to them, they take care of the granulator like they take care of their own children. They have formulated a set of operating procedures and maintenance systems for the granulator. Due to the meticulous maintenance of the equipment, the hidden danger of equipment failure is reduced, thereby extending the service life of the granulator, reducing the maintenance cost, and increasing the benefits for the enterprise. The following introduces some precautions in the operation of the granulator:
1. Lubricate the transmission parts of the granulator regularly, lubricate the bearing of the pressure roller every 2 hours, and lubricate the front bearing of the main shaft every 4 hours to ensure the flexible rotation of the transmission parts of the granulator and reduce the workload.
2. Regularly replace the lubricating oil in the gear box of the granulator. The new machine needs to be replaced once after half a month of operation, and it must be replaced once every 1,000 hours of continuous operation, which can prolong the service life of the gear.
3. Once a week, it is necessary to carefully check whether the connecting parts of each part are loose, whether the stroke safety switch is reliable, and at the same time clean the feeding auger and conditioner to avoid mechanical failure.
 
Related products
fish feed making machine
50-150 kg/h Fish Feed Making Machine
500-1000kg/h Fish Feed Production Line
fish feed making machine
Fish Feed Making Machine
200-500kg/h Fish Feed Pellet Line